Tany

Four ways to stand on a counter

Each direction is drawn at true scale, viewed from the front, with dimensions in millimetres. All four carry the same promise, «كل فنجان بيتحسب», and the same QR rules. We recommend A.

Front view of the Ticket stand: a ticket-shaped acrylic plate printed in the Habbaya café colours, set into a walnut base with a brass and a karkadeh dot.
A

The Ticket

Recommended

A plate cut like a Wallet pass: two side notches separate the café's half from the scan stub. It sits in a solid wood block with two inlaid dots, the Tany symbol made physical.

Plate
4 mm clear cast acrylic, 105 × 160 mm, reverse UV print with white backing, corner R8
Base
Solid walnut or beech, 130 × 55 × 25 mm, slot 4.3 mm at 10°
Inlay
Ø6 brass dot, and a second Ø6 dot with karkadeh enamel
QR
45 mm on white, 1.36 mm modules
Family
Tabletop 74 × 110 mm; window decal Ø140 mm

Works because

  • Reads as a "pass" before anyone reads a word
  • QR always on white: the best scan contrast
  • Only the print changes per café, so customising is cheap
  • Plates swap for promos without a new base
  • Acrylic shops and CNC routers all over Cairo can make it

Watch out for

  • Acrylic shows fingerprints: wipe weekly
  • Base needs CNC for the angled slot
Front view of the Kanaka Block: a brushed copper plate with a printed white insert, rising from a walnut block.
B

The Kanaka Block

A heavy walnut block holding a brushed copper plate, a nod to the copper «كنكة». The print lives on a bonded insert because a QR printed straight onto metal glares under café lights.

Plate
2 mm brushed copper, lacquered, 100 × 140 mm, 12° lean
Insert
84 × 118 mm printed PVC or paper, bonded
Base
Solid walnut, 120 × 40 × 60 mm
QR
44 mm on the white insert

Works because

  • The most luxurious of the four
  • Heavy and stable on busy counters
  • Strong coffee-culture story

Watch out for

  • Copper tarnishes and costs 3–4× acrylic
  • Two parts to assemble per café
  • Café colours only on the insert
  • Heavier to ship
Front view of the Cup Sleeve: a curved birch plywood arc printed with the headline and QR, standing on its own.
C

The Cup Sleeve

A bent birch arc shaped like a takeaway cup sleeve. It stands on its curve with no base.

Body
6 mm bent birch plywood, R125, 150 mm tall, 137 mm along the arc
Print
Direct UV on the convex face, matte
QR
48 mm, kept at the apex of the curve

Works because

  • Playful, unmistakably coffee
  • No base to make or lose
  • Pieces nest inside each other for shipping

Watch out for

  • Needs a bending mould: setup cost
  • A curved QR distorts at side angles
  • Artwork can't be swapped; reprint the whole piece
Front view of the Repeat: two steel discs on a slim foot, a karkadeh disc carrying the QR and an espresso disc carrying the headline.
D

The Repeat

The two dots of the logo cut from steel: one espresso disc for the promise, one karkadeh disc for the code. The most iconic of the four.

Discs
2 × Ø85 mm, 3 mm laser-cut steel, powder-coated (espresso, karkadeh)
Print
UV print on the coat; QR on a Ø62 white roundel
Foot
186 × 60 × 8 mm steel, welded
QR
40 mm, 1.21 mm modules

Works because

  • Instantly recognisable as Tany from across a room
  • Indestructible
  • A natural limited edition for chains and flagships

Watch out for

  • 186 mm wide: too wide for crowded counters
  • Café branding shrinks to the printed area
  • Powder-coat colour minimums per batch

Why A

The Ticket is the only direction that explains the product before anyone reads it: it looks like the pass that ends up in your Wallet. It keeps the QR on white, lets every café bring its own colours to the top half, and keeps the Tany stub identical everywhere, which is how customers learn to recognise it. D stays in the drawer as a premium edition for chains.

See the full stand system   Fabrication spec